How to Install Aluminum Tile Transition Strips for a Seamless Look

When two different types of flooring meet, a transition strip is necessary to create a smooth and seamless connection. Aluminum tile transition strips are a popular choice because they are durable, easy to install, and come in a variety of finishes to match your décor.

Materials You Will Need:

Aluminum tile transition strip

Measuring tape

Pencil

Utility knife

Trowel

Thin-set mortar

Grout

Grout float

Sponge

Instructions:

1. Measure and cut the transition strip. Measure the length of the area where the transition strip will be installed and cut the strip to size using a utility knife.

2. Apply thin-set mortar. Apply a thin layer of thin-set mortar to the back of the transition strip using a trowel.

3. Install the transition strip. Place the transition strip in the desired location and press it into the mortar. Use a level to make sure it is level.

4. Grout the transition strip. Once the mortar has dried, grout the transition strip using a grout float. Make sure to fill in all of the gaps between the transition strip and the tile.

5. Clean the grout. Once the grout has dried, clean it using a sponge. Dampen the sponge and wipe away any excess grout.

Tips:

Use a transition strip that is the same height as the tile.

Make sure to apply the mortar evenly to the back of the transition strip.

Press the transition strip into the mortar firmly.

Grout the transition strip as soon as the mortar has dried.

Clean the grout thoroughly to remove any excess.

By following these steps, you can easily install aluminum tile transition strips for a seamless look.